Acctek / HomePage / News / Industry news

Remove Metal Rust with a 1000 Watt Laser Cleaning Machine

Updatetime: 2022-10-05 17:49View:
Laser cleaning machine is well used in today's industry. It is common to see rust, grease, and other such substrates develop a layer over time on metallic and non-metallic products. Laser rust removal and metal parts cleaning technology has evolved over time. 1000 watt laser cleaning machine can cleaning metal rust, paint, oil, dust. It is widely used in daily life.
Laser cleaning machine
 

What does laser cleaning machine work?

Laser cleaning machine work in the same way as laser etching machines. This means that the laser applies focused energy to a portion of the material to be cleaned.
Thus, a very fine layer of the surface is removed and the cleaning material inside is exposed. Laser rust removal machines are very popular in the industry right now. Let's take a look at the main applications of laser cleaning system and the main industries that use the technology.
 

1000 Watt Laser Cleaning Machine

Our 1000 watt laser cleaning machine is the most powerful handheld laser system on the market. It has 270mm cleaning width, cleaning speed is 12m2/h, and an average laser power of 1,000 watts, making it ideal for industrial use for large area paint stripping, painting pre-treatment, removing rust, nuclear decontamination, cleaning of large molds, and pre-treatment of welding seams. The laser rust remover is easy to use, with a touch screen display and real-time controls. It also features internal cooling, touch operations, and a laser generator that lasts 10,000 hours.
The advantage of 1000 watt laser cleaning machine is non-contact cleaning, does not damage the part substrate;precise cleaning for precise positioning and precise size selection; without any chemical cleaning solution, no supplies, safety and protect environment;Simple operation, turn on the power, you can achieve automated cleaning by hand-held or with a robot; high cleaning efficiency, saving time; laser cleaning system is stable, almost no maintenance.
This 1000 watt laser cleaning machine can be used in countless industrial applications. The only limitation is the ability to distinguish between the material to be removed and the material to be protected.
laser rust removal
 

Laser cleaning is of interest to various industrial applications

Removing charred rubber residue from tire molds; giving new life to old pipes; cleaning pipes in nuclear power plants; and even larger projects, such as removing paint from rusted bridges and preparing surfaces for welding, can all be cleaned from industrial laser cleaning projects to benefit from.
Currently, the most common laser cleaning applications include:
Weld pretreatment to remove rust and other contaminants from the weld area
Post-weld treatment to remove oxides from aluminium and stainless steel
Laser finish to maximize paint adhesion
Laser oxide removal from specialty alloy ingots
The coating is removed immediately after the coating process to replace partial masking in the production line
Paint stripping for scrapped parts due to paint defects
Laser ablation is not only used for cleaning, but also widely used in other industrial applications.
 

What should be paid attention to when we use laser cleaning machine?

1.After receiving the machine, pay attention to whether the power supply voltage and current frequency connected to the machine are consistent with the machine
2.Before working, you need to let the chiller run to the set temperature, otherwise the laser will alarm and cannot be used
3.The use of the machine needs to be connected to dry air, otherwise it is easy to cause dust to enter the interior and burn the lens
4.Before working for the first time, check whether the red light is in the center position. If it is not in the center position, please contact the technician for guidance and adjustment in time.
5.If the lens is damaged or dirty, please replace or clean it in time, otherwise it will burn the interior and cause greater impact (when the cleaning effect becomes bad, check the position of the lens and the red light in time)
6.The working distance is about 50cm.
7.If you encounter problems, it is best to stop working in time and contact a technician to avoid more serious problems.
 
From metal to non-metal applications, if your product is covered with contaminants including rust, grease, mold, oil or others, then laser cleaning may be the solution for you. Laser cleaning is most effective on the target area and uses a laser to absorb and remove contaminants. With thousands of laser pulses per second, you can clean anything from a small area on a plane to the bulkhead of an aircraft carrier. In addition, we also provide laser solutions for the following areas:
Welding and Bonding Treatment
Coating Preparation
nuclear decontamination
Surface preparation for NDT/investigation
 
Laser rust removal machine is widely used in all walks of life with its fast speed and high cleaning efficiency. If you would like more information, please contact our staff.
 

Get a Free Quote Now!

Jinan AccTek Machinery

Headquarters: 3-1007, Minghu Plaza, No. 777 Minghu West Street,Jinan City / Branch:  A2-1-1802, Hanyu Jingu, High-tech Zone, Jinan City

Factory:  No. 3 Zone A, Lunzhen Industrial Zone,Yucheng City , Shandong Province


Copyright © Jinan AccTek Machinery Co.,Ltd