AKJ1325F-2
Acctek / HomePage / Laser Machine / Fiber Laser Cutting Machine
CO2 and fiber combined laser cutting machine
The CO2 laser head is used for carving and cutting non-metallic materials, and the fiber laser head is used for cutting metal. There are more processing methods with one laser machine and more materials can be processed.
  • Model:AKJ1325F-2
  • Category:Fiber Laser Cutting Machine
  • View:  Times
  • Brand:ACCTEK
  • Rating:
    / 10

  • price:$21200--$31700/Set
  • Lead time:10-18 working days
  • Customized features:vailable
1 Working area 1300*2500mm
2 Control System Au3tech               
3 Laser head Au3tech
4 Fiber Laser power 1000W/1500W (Raycus)
5 CO2 Laser power 150W  (Reci W6 )
6 Transmission All axis Taiwan TBI ball screw transmission
7 Motor Taiwan Delta 750w servo motor
8 Max Cutting Speed 35m/min
9 Max speed 50m/min
10 Guide rail Taiwan HIWIN linear guide rail 25mm
11 Min line width 0.1mm
12 Power Requirements 380V, 50/60Hz, 16A
13 Continuous Working Time 24Hours
14 Repeat positioning accuracy ±0.02mm
15 Dimensions 3800*1850*1300mm
16 Working voltage 220V single phase 50/60Hz

Machine features

The CO2 laser head is used for carving and cutting non-metallic materials, and the fiber laser head is used for cutting metal.

There are more processing methods with one laser machine and more materials can be processed.

  • Raycus laser generator
    Raycus laser generator
    Raycus has an efficient and professional R&D and production team.

    The single module CW fiber laser series not only can meet diversified demands of customers to the greatest extent, but also provide personal customization service.

    Now laser output connector is QBH, with multiple control modes.
  • RECI CO2 Laser Tube
    Equipped with a W6 laser tube, slim beam, high quality spot. It can cut non-metal materials up to 20mm. It has long lifetime, stable cutting performance.

    Installation of reinforcement stings, the laser tube is not easy to collide and cause damage when moving the machine.
    RECI CO2 Laser Tube
  • Aviation Aluminum Gantry
    Aviation Aluminum Gantry
    It is manufactured with aerospace standards and formed by 4300 tons press extrusion molding.

    After aging treatment, its strength can reach 6061 T6 which is the strongest strength of all gantries.
  • All axis ballsrew transition
    To prevent the cutting line deformation caused by the Y-axis screw bending, the Y-axis on both sides have been equipped two rails guide and double ball drive screw design to ensure the straightness and arc degree when with high-speed cutting is in operation.
    All axis ballsrew transition
  • Au3tech cutting head
    Au3tech cutting head
    A200M sheet metal cutting head was designed for flat cutting within 2000W by German brand A-cutter in 2018.

    Stable and reliable, high precision, good quality and long service life.
  • HIWIN Guide rails
    Rail works with slider, drive the machine move, with good bearing capacity.
    HIWIN Guide rails
  • Taiwan delta servo motor
    Taiwan delta servo motor
    Faster speed with signal feedback. Low heat radiation.

    Run smoothly at ultra-low speed. Reduce the vibration, avoid oscillation.

    Efficient torque enhancement. 

Optional

  • CO2 and fiber combined laser cutting machine

    More powerful Raycus laser

  • CO2 and fiber combined laser cutting machine

    IPG Laser Generator

  • CO2 and fiber combined laser cutting machine

    Computer

  • CO2 and fiber combined laser cutting machine

  • CO2 and fiber combined laser cutting machine

  • CO2 and fiber combined laser cutting machine

Applications

CO2 and fiber combined laser cutting machine AKJ1325F-2 fiber laser cutting machine is good at processing on common metal items in daily life such as advertising metal letter, kitchenware, environmental protection equipment.
Laser cutting machines are widely used in electronics, electrical, mechanical hardware, new energy lithium, packaging, solar, LED, automotive and other industries.  
It is widely used in the cutting of various metal materials, such as stainless steel, carbon steel, alloy steel, copper, brass, silicon steel, galvanized steel sheet, nickel titanium alloy, inconel, titanium alloy, etc.
  • CO2 and fiber combined laser cutting machine
  • CO2 and fiber combined laser cutting machine
  • CO2 and fiber combined laser cutting machine
  • CO2 and fiber combined laser cutting machine
  • CO2 and fiber combined laser cutting machine
  • CO2 and fiber combined laser cutting machine

Acctek's after-sales

  • Fiber Laser Cutting Machine

    1 to 3 years guarantee of the whole machine.

  • Fiber Laser Cutting Machine

    Main parts(excluding the consumables) shall be changed free of charge if there is any problem during the warranty period.

  • Fiber Laser Cutting Machine

    Lifetime maintenance free of charge.

  • Fiber Laser Cutting Machine

    Our staff can be sent to your company to install or adjust if necessary.

  • Fiber Laser Cutting Machine

    technical support online whole life

Write a Review

Name  :  

Country  :  

Email  :  

Raring  :   ★★ ★★★ ★★★★ ★★★★★

Content  :  


customers

  Song Shanfeng  

from  

South Korea

After comparing several companies, I finally chose their home. The materials and craftsmanship are really good, the hand is very heavy, the cutting power is full, and the express packaging is also tight, great!
customers

  Philip  

from  

Russia

After comparing several companies, I finally chose their home. The materials and craftsmanship are really good, the hand is very heavy, the cutting power is full, and the express packaging is also tight, great!

Get a Free Quote Now!

Jinan AccTek Machinery

Headquarters: 3-1007, Minghu Plaza, No. 777 Minghu West Street,Jinan City / Branch:  A3-4-905, Hanyu Jingu, High-tech Zone, Jinan City

Factory:  No. 3 Zone A, Lunzhen Industrial Zone,Yucheng City , Shandong Province( Postal code 251200)


Copyright © Jinan AccTek Machinery Co.,Ltd Power by DedeCms