A CNC router spindle is an electric spindle for high-speed routing, carving, drilling, punching and more machining methods. The spindle is the core component of the CNC router machine. With long-term use, if you neglect to maintain it, the spindle will be easily damaged. This may make you unable to work and have to pay for expensive repairs. Therefore, it is very necessary to perform routine maintenance on the spindle of the cnc router.

 

1. The CNC router spindle is the equipment that contacts the most processed workpieces and waste materials, so it is important to clean it well. After the CNC machine has been running for a day, the operator should use a vacuum cleaner to clean the motor spindle and motor rotor end terminals, to prevent the waste in the rotor end and terminal on the accumulation, in order to avoid the waste into the bearing, accelerated wear of bearings.

2. The operator shall form a habit of cleaning the clamp head and the pressure cap after unloading the knife.

3. It is also a custom that the operator must clean the tool, the clamp head and the pressure cap when putting on the knife. This detail can greatly extend the life of the spindle motor.

4. Each time the card is loaded and the tool is replaced, the operator must unscrew the cap and can not change the tool with the direct insertion method.

5. Do not use chipped, corroded or worn tool holders, because any damage to the taper will quickly transfer to the spindle. In addition, choose high-quality tool holders and try to avoid the cheapest ones.