We all know that CO2
laser cutting machine is suitable for cutting non-metallic materials, such as acrylic, wood, etc.; fiber laser cutting machine is suitable for cutting metal materials, such as stainless steel, carbon steel, etc. We can choose the laser cutting machine according to the materials we process. But there are many people who process both metal materials and non-metal materials, and the proportion of the two is similar. At this time, you can choose our hybrid laser cutting machine.
This laser cutting machine has two laser heads, one is used to process metal materials. One is used to process non-metallic materials to meet the needs of most people.
Today I will introduce this metal and non-metal hybrid laser cutting machine AKJ1390H-2.
The X/Y axis adopts Leadshine servo motor, which has high accuracy, improves the response speed and cutting accuracy, and extends the service life.
Good stability: Optimized the control of the numerical control system, can meet the precision machining of parts, stable dynamic performance, and can work for a long time.
The cutting part is of good quality: the machine follows the cutting head system, and the cutting head always follows the material to keep the position of the cutting point unchanged, thereby ensuring that the cutting part is smooth without reprocessing. It can be used for cutting flat or curved plates.
Using a sealed carbon dioxide laser tube, the main consumables are electricity, water cooling, auxiliary gas and laser.
The structure is simple, the operation is simple, the laser device is stable, and the maintenance cost is low.
# Working area: 1300*900mm
# Ruida 6332M control system with LCD panel
# Famous brand - Beijing Reci W6 130-150w laser tube
# Stepper motor and Leadshine 583 drivers
# Taiwan high accuracy square guide rails
# Shanghai Fulong belt and copper gear transmission
# Singapore imported 1*focus lens and 3*reflect mirrors
# Knife table
# Metal laser head with red dot pointer and auto focus system
# Water cooling system with water chiller CW5200
# Water protection switch
# Exhaust fan 550w to output smoke
# Standard tools box for installation and maintence
# Air compressor included
# Manual book and 8GB flash disk for manual instruction and software
Basic Features
1,6332M Ruida controller
Ruida control system, USB offline. The controller has better resistance to high voltage and antistatic ability
The 6332M system is a new generation laser engraving/cutting control system developed by Ruida Technology. The control system has better hardware stability, and has better anti-high voltage and anti-static characteristics. The man-machine operating system has a more friendly operation interface and more powerful functions. The controller includes more complete and better motion control functions, large-capacity file storage, more compatible dual-channel independent and adjustable laser power control interface, more compatible U disk driver, multi-channel general/special IO Control, communicate with PC, support Ethernet communication and USB communication, etc. automatically.
2,Analog metal height controller (with touch screen)
Auto focus function, support manual and automatic mode switching
3,300W/500W/600W CO2 tube
Compared with the laser tube of the same level, it has high efficiency and stable quality, and its service life is 10000 hours
4,Mirror and lens
Dia 20mm, focus length 63.5mm CO2 znse laser focus lens and dia 25mm mirror
5,Laser head with Z axis
Faster speed with signal feedback. Low heat radiation. Run smoothly at ultra-low speed. Reduce the vibration, avoid oscillation. Efficient torque enhancement.
Main cutting and engraving materials:
stainless steel,carben steel ,Acrylic, Crytal, Glass, Leather, MDF, Metal, Paper, plastic, Plexiglax, Plywood, Rubber, Stone, Wood.
Advertising industry: large blister word cutting, organic glass engraving and cutting,engraving of double color board,scutcheon,crystal cup, authorize brand etc.
Leather and clothing industry: complex text and graphic engraving on leather, synthetic leather,leatheroid, cloth, fur and leather. Craft processing like cutting,carving patterns or designs on woodwork,hollowing out.Cutting of clothes, underware,home decoration,gloves,bags,shoes,hats,toys and other industries.
Art & Craft industry: engraving on marble, bone, bamboo craft, leather, shell, ivory and so on.
Model industry:cutting on architectural model, aviation and navigation model, and wooden toys.
Packing and printing industry: engraving and cutting of printing rubber plate, and cutting of sandwich plate and die board cutting.
Package
(1). The machine will be produced after received your deposit.after the machine is ready, we will show you the machine photos and the testing video.then you pay 70% balance payment,we arrange shipping for you.
(2). Anti-collision package edge: All parts of the machine are covered with some soft materials, mainly the use of pearl wool
(3). Fumigation wooden box
(4). Whole film packaging machine
(5). The package is tandard exporrt plywood box,customized for every size machine.
Payment :
1. We accept Western union, Moneygram, TT, Trade assurance of Alibaba, and you can pay 30% in advance, 70% before delivery.
2. The machine will be produced after received your deposit.after the machine is ready, we will show you the machine photos and the testing video.
3. After you agree, please finish the balance.Finally.we arrange the delivery.
4. Its need about 10 days to produce the machine after get your deposit.
5. All thing is tested well,then we arrange the delivery.
After sale service of AccTek:
1. 12 months guarantee of the whole machine.
2. Main parts(excluding the consumables) shall be changed free of charge if there is any problem during the warranty period.
3. Lifetime maintenance free of charge.
4. We will provide the consumable parts at a factory price when you need replacement.
5. Machine has been adjusted before delivery.
6. Our technician can be sent to your company to install or calibrate if necessary.
Q&A
Q: How can I choose suitable machine?
A: Please communicate with us via inquiry or email, we can guide you. Please kindly tell us:
1) .What work table size you will need?
2).What work you will do?
Q: What's your payment terms? Delivery time and MOQ?
A: We can accept T/T(bank transfer), L/C, Paypal, Western union etc. Usually we need 30% as deposit, balance paid before shipment.
Delivery Time: 3-5 days after payment
MOQ: 1set
Q: If I bought a machine, how could you make it safe while shipping.
A: We have a professional package suitable for oversea transportation. Machine will be fixed well in the case.
Q: What's your quality control system?
A: All machines will be tested after finished. We have QC department response for this job. And we already got CE approved.
Q: If I don't know how to use the machine, can you teach me?
A: 1) There is a DVD disc including machine user manual and software user manual c/w machine.
2) Online (skype & phone)
3) Remote desktop software (Teamviewer)
4) Demo Video
Q: How can I do if the machine goes wrong?
A: If confronted with such problems, please contact us asap and do not try fix the machine by yourself or someone else. We will response within 24 hours as quick as we can to solve it for you.
Q: Are you factory or trading company?
A: We are an OEM factory with many experience, annual productivity can reach 5,000 sets.
Jinan AccTek Machinery Co.,Ltd specializes in manufacturing CNC Router and Laser machines.
Since 2005 we have been based in the Industrial Zone of Jinan City, Shandong Province south of Beijing.
Our main products are AccTek CNC Routers and Laser engraving and cutting machines. Stock or custom configurations are our specialty. Components for our machines are sourced from world class suppliers and innovators in machine control.
These machines are used in many industries, crafts and arts businesses around the world. These include woodwork, metal and stone work, aluminum fabrication, boat building, shop fitting, mold making, to name a few.
Our dedicated and highly skilled after sales service department, sales team, and thorough quality assurance procedures mean that you can buy with confidence.
Now we own two workshops,one for cnc router and another for laser machines. Which covers 3000,0square meters. There are 40 members in manufacturing and 21 members for marketing and service.
If you are interested in our
laser machine, welcome to our official website for more information.
CN
EN
RU
FR
