Acctek / HomePage / Blog Center / Laser Machine Blog
Optional accessories for CO2 laser cutting machine
When using a CO2 laser cutting machine, when the material to be processed is too thick or cylindrical objects need to be engraved, what kind of accessories can we choose to assist the work? This blog introduces the optional configuration of the laser cutting machine for you.
Some customers use the laser cutting machine to process thick materials, but because the laser head is always on the same plane, it cannot move up and down. In this situation, we should add a lifting platform to the laser machine. The lifting platform is installed under the worktable, and two small motors work synchronously, driven by a large driver, which can ensure that the height of the table is always the same during the lifting process, and avoid the table from tilting. Generally, when the thickness of the material exceeds 23MM, it is best to consider adding a lifting table, which will be more helpful for the laser cutting machine to work.
If you need to engrave or cut cylindrical materials during your work, such as engraving patterns on the surface of a wine bottle, then you need to select a rotary axis for the laser machine in this case. Rotary axis are divided into chuck type and roller type. The roller type can be equipped with multiple rotary axis and can engrave multiple cylindrical materials at the same time. It is suitable for mass production and processing and can improve work efficiency. 
It should be noted that if you add a rotary axis to the laser cutting machine, you must add a lifting table at the same time. Because the rotary axis is placed on the worktable, it has a relatively high height, and it can be used normally after adding a lifting platform.
The above is the relevant introduction about the optional accessories of the laser cutting machine. If you have other needs, ACCTEK can customize the machine for you. Everything is based on your needs

Leave a message

Jinan AccTek Machinery

Headquarters: 3-1007, Minghu Plaza, No. 777 Minghu West Street,Jinan City / Branch:  A3-4-905, Hanyu Jingu, High-tech Zone, Jinan City

Factory:  No. 3 Zone A, Lunzhen Industrial Zone,Yucheng City , Shandong Province( Postal code 251200)

Copyright © Jinan AccTek Machinery Co.,Ltd