Acctek / HomePage / News / Industry news
How to make the stone engraving machine not easy to rust?
Updatetime: 2021-07-23 16:03View:
When the engraving machine is idle, it is easier to rust, because the environment of the workshop is still relatively humid, so some parts of the engraving machine will be easy to rust, then this is still unfavorable for the production of machinery and equipment, then we We must adopt some methods in our daily life, and then try to avoid them as much as possible.
So let's take a look at how to avoid the rust of the stone engraving machine. Because the engraving machine itself often uses water when it is in operation, the machine is relatively humid, and the track must be maintained every day.

Attention during maintenance

1.It must be noted that the oil used for the X, Y, and Z three-axis polished rods is maintained.
2. The screw part must be wiped with butter; if the working environment temperature is too low in winter, the screw, polished rod, square rail or round rail should be washed and cleaned with gasoline first, and then oil is added, otherwise it will cause the machine The resistance of the transmission part is too large, which leads to problems such as the dislocation of the machine
3. The surface of steel parts, such as the ball screw, the hardened steel raceway of the rolling guide, and the surface of steel fasteners, should be rubbed with cloth or cotton dipped in butter every few days. Other parts should be frequently observed for weak rust. If there is any, it should be wiped off with a cloth dipped in engine oil and used as the focus of future rust prevention.
4. The surface of aluminum parts should also be wiped with a cloth dipped in butter every few days, or a layer of varnish can be sprayed. And often observe whether there are pits.
5. It is best to fill the cooling water tank with emulsified oil to prevent rust, and do not use clean water.
The above is to take certain protective measures when the stone engraving machine is idle to avoid letting it rust and affecting the normal operation of the machine and equipment.
When the operator is performing the operation, maintenance must be carried out, but the problem of rust should also be paid attention to. With the continuous improvement of the structure of the engraving machine, the processing efficiency and processing quality of the workpiece are also continuously improving.
Whether you are in the woodworking industry, advertising industry or other printmaking industry, as long as you have engraving needs, you can consult us online. Our staff will provide you with the best purchasing plan.

Get a Free Quote Now!

video | Blog Center | Events and Support

Copyright © Jinan AccTek Machinery Co.,Ltd | XML MAP