Acctek / HomePage / News / Industry news
How to correctly choose the spindle power of the engraving machine
Updatetime: 2021-08-17 15:20View:
   No matter what material is engraved, the power of the spindle is selected according to the processing effect. The main power selected for the processing effect of embossing, hollowing, cutting, and lettering is different, and different powers will be selected according to the hardness of the processing material !

    Generally speaking, after meeting the demand, a higher power will be better. The actual power consumption of the motor is related to the load. Therefore, for the spindle of the engraving machine, under the same load, the actual power consumption of the spindle of large and small power is not much different. However, due to the large weight of the rotating body and the size of the bearing, the general high-speed rotation with high power will be a little lower than that with low power.

Woodworking engraving machine 1.5KW-4.5KW (common spindle power)

Woodworking engraving machine: The spindle motor of the woodworking engraving machine can be selected according to the hardness of the wood to be processed. Its power: generally around 2.2kw-4.5kw, this combination is also the most reasonable.

1 Spindle type water cooling spindle
2 Spindle power 3.2KW
3 Spindle rotating speed 0-24000rpm
4 Power supply 380v±10v,50/60HZ,3 phases

Advertising engraving machine 1.5KW-3.0KW (common spindle power)

Advertising engraving machine: The engraving object is a relatively soft material, so the spindle power of the advertising engraving machine can be within 1.5kw-3.0kw. If you choose this way, you can achieve the purpose of engraving and save costs.

1 Spindle 1.5KW water cooling spindle
2 Spindle speed 24000 RPM
3 Drive Motor  NEMA34 stepper motor and Leadshine M860Hdriver 
4 Max. Rapid Travel Rate  15000 mm/min
5 Max. Working speed 8,000mm/min

Mold engraving machine 4.5-6.0KW (common spindle power)

Carving all kinds of large non-metallic molds, especially suitable for any kind of foam (EPS) mold, wooden boat model, wooden model aviation and other wooden mold 3D processing.

1 Spindle type air cooling spindle
2 Spindle power 6.6/4.5/9.0 KW
3 Power supply 220±10, 50HZ(AC380v)
4 Spindle rotating speed 0-18000rpm

Get a Free Quote Now!

video | | Events and Support

Copyright © Jinan AccTek Machinery Co.,Ltd | XML MAP