ACCTEK / HomePage / News / Industry news

How to maintain a CNC router

    CNC router maintenance
    Routine maintenance of CNC routers is very important.Develop a good maintenance habit, can make the CNC router to maintain a good state of responsibility, greatly prolong the service life of CNC router.Today, let's talk about maintaining a CNC router in the summer.
    If your CNC router is temporarily not needed, it should be refueled and emptied as needed to ensure transmission system flexibility.After refueling, walk slowly back and forth to ensure that smooth oil is evenly added to the guide rail and lead screw.
    For winter maintenance of CNC routers, first clean the guide rail and lead screw waste, then clean the guide rail and lead screw oil and waste.Due to the low temperature, guide rail and lead screw can be loaded with oil.It's best to add antifreeze oil.
    The impact of winter temperatures on the water environment is not very good for the CNC router (but because some customers butter the lead screw in summer and forget to clean it, the machine cannot be turned on every time it starts up, and some rooms are very cold, although the oil is added, it is still frozen, so the machine cannot operate).Therefore, the ambient temperature of the operating room should be ensured as far as possible, and it is best to reach the normal room temperature, at least the supervisors will not be very cold.Check the temperature applicable to the refueling range and reach at least the maximum temperature.When the machine is not in production, if the room temperature is low, it is best to pour water into the tank to avoid frostbite of the tank and pipe.
    Many customers often forget to replace the water pumped by the CNC router, especially in autumn and summer, due to the high outdoor temperature, the spindle motor is difficult to cool.Here we especially remind customers: cooling water is a necessary condition for the normal operation of spindle motor.If the cooling water is too dirty, it will cause great harm to the motor, so as to ensure the cleaning of the cooling water and the normal operation of the pump.Pay attention to the water level, do not make the water-cooled spindle motor short of water, so that the motor heat output can not be timely.Pay attention to the surrounding temperature.Water tanks and pipes cracked because of the extreme cold of the water.

    The importance of vacuum cleaner to engraving machine
    Engraving machine vacuum hose is the support of all the important equipment vacuum system, such as some woodworking, furniture carving manufacturers use the most woodworking machinery.PU hose is the hose for industrial vacuum cleaner.Mainly used for dust, powder, fiber, debris and particles, gas liquid and other abrasive solid environment, used for dust absorption workshop, paper and textile fiber suction and transport.It plays an important role in improving the working environment and physical health of the buyer.
    Xinpu steel wire hose force engraving machine is very wear-resistant.The copper plated wire enhances the strength of the hose, which is resistant to low pressure, vacuum and shrinkage.High axial strength, smooth material escort, with good chemical resistance.The sawtooth radius is about 3 times of the outside diameter, which can generate static electricity.Structure: inner wall coated with solid elastic copper wire, top polyether polyurethane, inner wall thickness 0.6-0.9mm, inner wall lubrication;More than 10 times higher than ordinary PVC hose, hose wear resistance is good.
    Engraving machine temperature: about -30℃ to +90℃, short time to +150℃.Whether used in winter or summer, it will not become hard or soft, thus affecting the effect of use.PU steel hose can be customized food grade hose.Hose walls are environmentally friendly and odorless, helping you reduce dust and sawdust.
cnc router

    Woodworking CNC router processing technology
    How to operate the woodworking CNC router, the woodworking CNC router use process, for the customer to operate the woodworking CNC router provides a set of accurate steps, this part belongs to the CNC router tutorial.General woodworking CNC router usage process tells you, then updates the tutorial in more detail.
    1. Make the carving path
According to the needs of the customer to develop the appropriate engraving path.The first way is to make your own drawings and engravings;The second way is to get a professional draftsman to do it;The third method is to make scanners and pointer instruments.
    2. Simulate modeling path to ensure correct path
This is a very safe way to buy real wood furniture from a CNC router manufacturer.Sometimes, due to a small error, the carving path is incorrect.At this point, simulate the carving path, determine the correct carving path, reduce the processing error rate.

    1,its spindle speed is high for the processing of small tools, torque is relatively small, focus on the "engraving" function, such as wood (specialized processing of wood called wood carving machine), double color board, acrylic board hardness is not high board, not suitable for strong cutting large pieces.At present, most of the products on the market under the banner of engraving machine are mainly for processing handicrafts, low cost, due to low precision, not suitable for mold development;But there are exceptions such as chip engraving machines.
    2,High speed cutting machine tool is used to complete the medium milling amount, and to reduce the milling grinding amount to the minimum processing equipment
    3,The non-moving part is very rigid and the moving part is very rigid and as light as possible.
    Advantages: can be in small amount of cutting (general 10 flat knife, for 45 steel (300) depth of 0.75 is good);Disadvantages: the correct use can play a high efficiency, low cost, so that the grinding quantity into a minimum.If you don't use it correctly, you'll soon have a mountain of tool waste.
cnc router

END


Get a Free Quote Now!