Acctek / HomePage / News / Industry news
What do you need to do when you buy a woodworking engraving machine
Updatetime: 2021-07-13 15:37View:
     Woodworking engraving machine is mainly used for wood processing, crystal, copper, aluminum, etc,Make it more beautiful value.
     There are many kinds of woodworking carving machines and many brands, leading to different prices.The style is made according to the customer's demand.Can be applied to the wood industry, advertising signs, furniture manufacturing, toys and gifts manufacturing, decoration industry, PCB production, etc.
     Woodworking machinery.It is divided into three control methods: first, all the computing work is completed by the computer control, engraving machine in the work of the computer in the working state, unable to carry out other typesetting work, may cause waste due to the computer operation error;The second is the use of single-chip microcomputer control, engraving machine work at the same time can be typesetting, but can not close the computer, can reduce the waste caused by computer error operation;The third is to use USB port to transfer data, the system has a memory capacity of more than 32M, save the file can be completely away from the computer, close the computer or other typesetting, can greatly improve the work efficiency.

     Maintenance steps
1. Unplug the power cord.Safety first.
2. Take off the plastic sheath, take the cross screwdriver counterclockwise, and unscrew the two screws.
3, take a word screwdriver counterclockwise release the carbon brush screw left and right, with a pointed nose pliers to take out the carbon brush, carefully note the carbon brush installation position, the recovery was smooth.
4. Dust the carbon brush with a brush.Give a gentle spray when you have an air gun.
5, shell to slightly force open.
6. Rotate the motor shaft with your finger to see if there is any sound of touch or metal friction.
7. Make sure there is no dust, use the needle oil, put a little bit on the ring into the seam, and unscrew the shaft with your finger to ensure that the oil eats into it.
8, clean the remaining oil, or dust in the future.
9. Follow the above steps to restore the equipment.
10. After more screws are locked, first rotate them with your finger to see if they are suitable or not.
11, power on, until the sound is normal!

Application domain editing
Woodworking industry: three-dimensional wave board processing, cabinet doors, solid wood doors, process wood doors, paint-free doors, screen, process Windows, shoeshine machine, game machine cabinets and panels, mahjong table, computer table and board furniture products auxiliary processing.
Advertising industry: advertising signs, logo production, acrylic cutting, blister molding, a variety of materials advertising decorative products production.
Mold industry: can carve copper, aluminum, iron and other metal mold, as well as artificial marble, sand, plastic board, PVC pipe, wood and other non-metallic mold.
Other industries: can carve a variety of large relief, film carving, widely used in the arts and crafts industry.

     Edit with notes
1. After the carving position is determined, the workpiece coordinates of X, Y and Z axes must all be put into "0".
2, adjust the carving speed and spindle motor speed, in case the carving speed is too fast, too slow and the knife is broken.
3, when the automatic knife, pay attention to the knife block must be insulated from the engraving machine aluminum table.
4. When carving, if you are not sure about the first knife or afraid of making mistakes, you can slow down the feeding speed and adjust the speed back to normal when carving is normal;You can also simulate carving in the air space to see if it works.
5. If you do not use the woodworking engraving machine for a long time, you should add oil idling regularly every week, preferably every week, so as to ensure the flexibility of the transmission system.
6. The continuous operation time of woodworking engraving machine is required to be less than 10 hours per day;To ensure the cleanliness of cooling water and the normal work of the water pump, water cooling spindle motor must not be water shortage phenomenon, regular replacement of cooling water, in order to prevent excessive water temperature, circulating water as much as possible, can be replaced with large capacity water tank.
7. After each use of the woodworking engraving machine, pay attention to the cleaning. Dust on the platform and transmission system must be cleaned;Regularly lubricate X, Y and Z shafts of the transmission system.
8, the operator had better wear a dust mask and protective glasses when operating the woodworking carving machine, in order to avoid the dust generated in the processing of the invasion of the human body, causing discomfort.
9, woodworking engraving machine daily maintenance method to woodworking engraving machine plus a certain dust removal device, choose the dust removal equipment for use.
If you are interested in it, please feel free to contact us.
TEL:  +086-0531-86160023
MAIL:  sales@acctekgroup.com
akm1325c

Get a Free Quote Now!

video | | Events and Support

Copyright © Jinan AccTek Machinery Co.,Ltd | XML MAP