|2||Control System||Cypcut controller system|
|4||Guide rail||Taiwan HIWIN Linear guide rail 25mm|
|5||Transmission||Y axis gear and pinion; Z axis ball screw|
|6||Electronic Components||French Schneider|
|8||Max Cutting Speed||35m/min|
|9||X axis max speed||65m/min|
|10||Y axis max speed||100m/min|
|11||Z axis max speed||30m/min|
|12||X axis max acceleration||1G|
|13||Y axis max acceleretion||1G|
|14||Cooling Way||Water Cooling|
|15||Min Line width||0.1mm|
|17||Continuous Working Time||24Hours|
It adopts an electric clamp design on both sides and it can modulate the center automatically. The diagonal adjustable range is 20-200mm(Optional:300mm).
Raycus laser generator
Raycus has an efficient and professional R&D and production team. The single module CW fiber laser series not only can meet diversified demands of customers to the greatest extent, but also provide personal customization service. Now laser output connector is QBH, with multiple control modes.
Raytools brand cutting head
HIWIN Guide rails
Rail works with slider, drive the machine move, with good bearing capacity.
Japanese Yaskawa Servo Motor
Y axis 1.8KW, X axis 850W. Faster speed with signal feedback. Low heat radiation. Run smoothly at ultra-low speed.Reduce the vibration, avoid oscillation. Efficient torque enhancement.
More powerful Raycus laser
We supply laser power from 0.5KW to 12KW to meet different customers'cutting demands.
IPG Laser Generator
IPG Laser Generator is available from 1.0KW to 12KW. It has better performance in cutting aluminum,brass and cooper.
You May Also Interested in Following Products