（1）Raycus laser generator
Raycus has an efficient and professional R&D and production team. The single module CW fiber laser series not only can meet diversified demands of customers to the greatest extent, but also provide personal customization service. Now laser output connector is QBH, with multiple control modes.
（2）RECI CO2 Laser Tube
Equiped with a W6 laser tube. It can cut non-metal materials up to 20mm. It has long lifetime, stable cutting performance and excellent after sale service.
（3）Aviation Aluminum Gantry
It is manufactured with aerospace standards and formed by 4300 tons press extrusion molding. After aging treatment, its strength can reach 6061 T6 which is the strongest strength of all gantries.
（4）All axis ballsrew transition
To prevent the cutting line deformation caused by the Y-axis screw bending, the Y-axis on both sides have been equipped two rails guide and double ball drive screw design to ensure the straightness and arc degree when with high-speed cutting is in operation.
（5）Au3tech cutting head
A200M sheet metal cutting head was designed for flat cutting within 2000w by German brand A-cutter in 2018.Stable and reliable, high precision, good quality and long service life
（6）HIWIN Guide rails
Rail works with slider, drive the machine move, with good bearing capacity.
（7）Taiwan delta servo motor
Faster speed with signal feedback. Low heat radiation. Run smoothly at ultra-low speed. Reduce the vibration, avoid oscillation. Efficient torque enhancement.
(1) optical fiber laser has high electric-to-optical conversion efficiency, which is more than 30%. Low-power optical fiber laser does not need to be equipped with chiller, and adopts air cooling, which can greatly save the power consumption during work, save the operation cost and achieve the highest production efficiency.
(2) the operation of the laser only requires electric energy, no extra gas is needed to produce the laser, and it has the lowest operation and maintenance costs.
(3) the fiber laser adopts the design of semiconductor modularization and redundancy. There is no optical lens in the resonant cavity, and no start-up time is needed. It has the advantages of free adjustment, free maintenance and high stability, which reduces the cost of accessories and maintenance time, which is incomparable to the traditional laser.
(4) the output wavelength of the fiber laser is 1.064 micron, 1/10 of the wavelength of CO2. The output beam is of good quality and high power density, which is very conducive to the absorption of metal materials. It has excellent cutting and welding ability, thus making the processing cost lowest.
(5) the whole machine optical route optical fiber transmission, does not need the complex mirror and other light guide system, the optical path is simple, the structure is stable, the external optical path maintenance free.
(6) there are protective lenses in the cutting head, so that precious consumables such as focusing lens are rarely consumed.
(7) light is exported through optical fiber, making the design of mechanical system very simple and easy to integrate with robot or multi-dimensional workbench.
(8) after the laser is equipped with a light gate, it can be divided into multiple machines by optical fiber and work at the same time. It is easy to expand the function and easy to upgrade.
(9) optical fiber laser is small in size, light in weight, movable in working position, and occupies a small area.
How should fiber-optic laser cutting machine be used and maintained?In the use of optical fiber laser cutting machine for object processing, need to learn the use of optical fiber laser cutting machine equipment, maintenance skills, in order to better play the effectiveness of the equipment, to maximize the efficiency of the equipment.
How to use and maintain the fiber laser cutting machine:
1) check the steel belt frequently and make sure it is tensioned.Otherwise in the operation of the problem, it may hurt people, serious can also lead to death.The steel strip looks like a small thing, but there is something serious wrong with it.
2) check the straightness of the track and the verticality of the machine every six months, and timely maintenance and debugging if abnormal conditions are found.Do not do this, it is possible to cut out the effect is not very good, the error will increase, affecting the quality of cutting.This is a top priority and must be done.
3) use a vacuum cleaner once a week to remove dust and dirt from the machine. All electrical cabinets should be strictly dustproof.
4) each guide rail should be cleaned regularly to remove dust and other sundries, and the equipment should be wiped regularly to ensure normal rack and lubricating oil is added to ensure lubrication without sundries.Guide rail should be cleaned and lubricated frequently, and the motor should be cleaned and lubricated frequently, so that the machine can move in a better position and cut more accurately, and the quality of cut products will be improved.
5) the double focal length laser cutting head is a fragile item on the laser cutting machine, which has been used for a long time, resulting in the damage of the laser cutting head.
CO2 and fiber combined laser cutting machine AKJ1325F fiber laser cutting machine fiber laser cutting machine is good at processing on common metal items in daily life such as advertising metal letter, kitchenware, environmental protection equipment. Laser cutting machines are widely used in electronics, electrical, mechanical hardware, new energy lithium, packaging, solar, LED, automotive and other industries. Stainless steel, carbon steel, alloy steel, copper, brass, silicon steel, galvanized steel sheet, nickel titanium alloy, inconel, titanium alloy, etc.
● Heavy duty ATC CNC router with horizontal spindle AKM2030C
● High quality AKJ1530 CO2 laser cutting machine
● Buy a better 5 axis cnc router machine for your shop
● The applicable scope of laser cutting machine
● Application and selection of laser cutting machine
● Principle and technology of laser cutting glass
● How to choose a cnc router
● How to deal with soot in laser cutting and the application field of laser cutting
● Acctek exhibition footprint
● ATC CNC Router with a horizontal spindle
Get a Free Quote Now!