Acctek / HomePage / News / Company news
Several daily maintenance Suggestions for optical fiber laser cutting machine
Updatetime: 2021-07-13 10:48View:

1. Regular dust cleaning within the machine

Due to the laser cutting machine in cutting goes directly to the metal surface evaporation, so on the surface of cutting machine and internal often can produce a lot of dust, we should often will use vacuum cleaner to suck out the dust, so as to ensure the mechanical spotless, between the internal parts in this way can ensure parts between can normal operation.

Parts should be treated with lubricating oil frequently

We need to lubricate rack, guide rail and many cutting machine parts from time to time, so that they can ensure the precise bite of the gear during operation.In this way, the mechanical operation will be in the normal operation of the track, cut out of the product is more accurate.

 

2. Parts and components should be treated with lubricating oil frequently

We need to lubricate rack, guide rail and many cutting machine parts from time to time, so that they can ensure the precise bite of the gear during operation.In this way, the mechanical operation will be in the normal operation of the track, cut out of the product is more accurate.

In addition to the daily maintenance of the optical fiber laser cutting machine, we must carry out strict inspection on the parts when we buy the machine, so as to eliminate the damage of the machine from the root.At the same time, if any parts are found damaged during the use of the machine, it must be replaced in a timely manner, so as to protect the machine itself, and also to ensure the ideal cutting effect of laser cutting machine.Only after the above two points, can extend the service life of this kind of cutting machine.

 

3. Always check the Angle of the tool

Because in the whole fiber laser cutting machine, the most important part is the cutting machine, if the Angle of the cutting machine appears a certain deviation, then in the cutting process will easily lead to the final precision of the cutting items is not so accurate.

 

4. Keep the steel belt tensioned at all times

Steel strip in the operation of laser cutting machine has played a very important role in the transmission, and the material of the this kind of steel strip it belongs to the steel, the steel in the process of use, if not taut, could easily lead to be cut and be left out of orbit, and even the phenomenon of steel belt and slip may be produced, so the threat to the safety of the staff had a great, so no matter when and where, must keep the steel strip is in a state of tension, so as to the safety of construction personnel play a protective role.
 

Get a Free Quote Now!

video | | Events and Support

Copyright © Jinan AccTek Machinery Co.,Ltd | XML MAP