Big size laser engraving&cutting machine|ACCTEK

Big size laser engraving&cutting machine

The big size laser cutting machine has a larger worktable, which can engrave and cut large-area plates. It is non-contact processing, no knife trace, no damage on the surface of the machined part, no deformation. It is widely used in carving and cutting of various non-metallic materials.

Model:AKJ1325/
Category:CO2 Laser Machine
View: Times
Brand:ACCTEK
Rating:

4.8
/ 10
price:$4600--$5200/Set
Lead time:10-18 working days
Customized features:vailable

NO	Description	Mode
1	Model	AKJ1325	AKJ1530
2	Laser medium	CO2
3	Working area	1300*2500mm	1500*3000mm
4	Working table	Blade table
5	Laser Power	80w/90w/100W/130w/180w/280w/300w
6	Power Supply	380v/220v/50HZ,100v/60HZ
7	Min Line width	≤0.15mm
8	Position accuracy	0.01mm
9	Repetition accuracy	0.02mm
10	Cutting speed	200 mm/s
11	Guide rail	Hiwin from Taiwan
12	Transmission method	Shanghai Fulong belt
13	Drive system	Stepper motor and driving system
14	Cooling system	Water-cooling
15	Control system	DSP off-line
16	Control software	RDCAM, Coreldraw, Photoshop, AutoCAD, Tajima
17	Graphic format support	PLT,DXF,BMP,JPG,AI,ect
18	Working environment	0-45℃
19	Operating Humidity	5-95%
20	Net weight	910KG	1200KG
21	Gross weight	1080KG	1350KG

Machine features

The big size laser cutting machine has a larger worktable, which can engrave and cut large-area plates.

It is non-contact processing, no knife trace, no damage on the surface of the machined part, no deformation. It is widely used in carving and cutting of various non-metallic materials.

Big size laser engraving&cutting machine

6445G Ruida controller

Ruida control system supports USB cable controlled by computer and and also offline control system by just a U disk.

The controller has better resistance to high voltage and antistatic ability.
Reci CO2 tube

Compared with the laser tube of the same level, slim beam, high quality spot.

Installation of reinforcement stings, the laser tube is not easy to collide and cause damage when moving the machine.
Laser head with red point

Cutting head always follows the material to keep the cutting point location unchanged.
Mirror and lens

45° mirror adjustment set. Three point dimming bolt for easier dimming.

Imported Lens, suitable for various environments, and has high precision and high speed.
HIWIN Guide rails

Rail works with slider, drive the machine move, with good bearing capacity.
Stepper motor

Faster speed with signal feedback. Low heat radiation.

Run smoothly at ultra-low speed. Reduce the vibration, avoid oscillation.

Efficient torque enhancement.

Optional

Up and down table
Water chiller
Rotary device
Rotary device.
Honeycomb table

Applications

Applicable materials: Leather, cloth, wool, fur, acrylic, Plexiglas, wooden board, plastic, resin and other Non-Metallic Materials.
Widely applied in craft gifts, souvenir, Chinese paper cutting, advertising signs, clothes, furniture and many other industries.

Acctek's after-sales

1 to 3 years guarantee of the whole machine.
Main parts(excluding the consumables) shall be changed free of charge if there is any problem during the warranty period.
Lifetime maintenance free of charge.
Our staff can be sent to your company to install or adjust if necessary.
technical support online whole life

Write a Review

Engineering

from

Swiss

We've been using it for some time to make metal products. With its built-in software, safety features, and strong after-sales service, it is one of the best metal laser cutting machines for artisans or small businesses. The delivery was quick and the packing was excellent. There is no damage to the machine.

You May Also Interested in Following Products

Get a Free Quote Now!

How to choose the water cooler of the laser cutting machine?

The reason why the laser tube does not emit light and how to deal with it

High End Fiber laser cutting machine have shipped to Argentina

Analysis on the principle of laser cutting machine and core configuration

How to adjust the laser to the center of nozzle

What is the classification and classification basis of laser generators?